Hi,
In this part, I make a start, programming the monitor (BIOS)
This monitor will enable you, to write your own programs
You can find all the possible instructions in the CU. (10. Units, 05.01 IR+CU)
At the property page of the ROM, near the micro-counter, you'll see all instructions.
In the Rom, which is called "Monitor", you can find the start of this program.
The attached file also contains a read-me-first file, and an explanation of the first part of the program.
Best Regards
Hans Cadans
part-11. Start of programming
-
- Posts: 57
- Joined: Thu Apr 24, 2014 12:30 pm
part-11. Start of programming
- Attachments
-
- Part-11.CircuitProject
- (2 MiB) Downloaded 2621 times