Programm don't run

[logic]

Ik ben vrij nieuw met dit programma, als ik het wil runnen dan krijg ik errors

[admin]

Hi, It will be easier if you will ask questions here in English as I can't speak German, sorry.
What kind of errors do you see? If you share a screenshot here it will be easier to help you.

[logic]

you can see in the attachment, what is wrong.
I don't see what i did from.
If i draw the line again, the error go away or still keeps coming.


Maybe you know what i did wrong? Because i'm new with the programm

I speak dutch by the way

[admin]

I think I've found the problem.
Open your "Inganspoorten D2" and find the input pin "q2" then hold Shift key on your keyboard and click the wire connected to that pin. You will see it also connect input pin "/q3". That is what the message box is saying.
Did you read help pages at: https://logiccircuit.org/help.html?
Happy designing.

[logic]

Tnx for your help, i did not look good enough.
Now i got the next problem and that is: if i hold button "1" the safe opens.
but the safe only open with the code "3505" if PC is "0"
and open with the code "7144" if PC is "1"

Maybe also a little mistake, i can't find

[admin]

Well, I recommend you make your circuits much smaller. This will let you debug them with less effort. You can combine wires in bundles and make sub-circuits. Test them separately so you know your components are working in bigger assembly.