8 X 8 Binary Multiplier

TCWORLD · Post by **TCWORLD** » Thu Sep 15, 2011 5:20 pm

A circuit to multiply a pair of 8 bit numbers.

Multiplier.zip: 8 x 8 Binary Multiplier; (45.41 KiB) Downloaded 2939 times

I plan to modify the circuit to be able to select whether it does Addition, Subtraction, or Multiplication, and possibly integer division aswell

Tom

TCWORLD · Post by **TCWORLD** » Fri Sep 16, 2011 4:56 pm

It can now do: A + B, A - B, B - A, - A - B, A x B.

Also, I have added a second thing i have been working on which is a modular method to do binary to BCD conversion with only Primitive logic gates.

I have implimented a method which allows conversion of any number of binary bits by simply adding an extra chain of converters for each successive bit. The conversion chains can be made large using Carry In and Carry Out connections on each BCD Digit module.
The output of my ALU is converted to BCD and shown on a series of 7 segment display's

Tom.

TCWORLD · Post by **TCWORLD** » Sat Sep 17, 2011 1:16 pm

Inputs and outputs are now displayed in binary and decimal (decimal shows the operation aswell!

)

TCWORLD · Post by **TCWORLD** » Sat Sep 17, 2011 3:12 pm

I have begun trying to make it do Divide. At the moment all the division bit can do is give you an error if you try to divide by 0.

Post by **admin** » Sat Sep 17, 2011 4:21 pm

That is really impressive.
Why don’t use multi bit wires? They will dramatically reduce number of wires you need to have between circuits.
Looking forward to see your division implementation

TCWORLD · Post by **TCWORLD** » Sun Sep 18, 2011 9:54 am

R.E. the multibit wires, I have used in some places to save time, but most often I find it less confusing if i can see all of the wires.

I have worked out how long division should be doable in logic and have pretty much implimented it, there are just a couple of issues resulting in the wrong answer being given.

TCWORLD · Post by **TCWORLD** » Sun Sep 18, 2011 5:10 pm

Long Division is now implimented.

Logic Gate Calculator.zip: Logic gate Calculator (With +, -, x, and / functions); (337.93 KiB) Downloaded 1974 times

At the input there are now three buttons for selecting operation - The leftmost is: 1 = Add (Takes priority over other buttons), 0 = Multiply/Divide. For the middle one (Assuming the leftmost is 0): 0 = Multiply, 1 = Divide. For the Rightmost, during division: 0 = Quotient, 1 = Remainder.

If you try and divide by zero, the result is ErrOr. Apart from the divide by zero clause, all the division logic is contained within a circuit called "8-bit by 8bit Divider" (Under Complex Functions), and the block is placed inside the ALU.

I can provide more information if needed

Tom.

TCWORLD · Post by **TCWORLD** » Mon Sep 19, 2011 5:47 am

Found a bug in the circuit when returning from divide by 0, whereby it would show error as it is suppose to, but the ALU still tried to divide anyway, meaning that the first non divide by zero after it would be incorrect. Basically I had forgot to tell the ALU to not try and solve anything divided by zero. This is fixed by making it divide by 255 if you try and enter a zero divisor.

Obershnaus · Post by **Obershnaus** » Mon Sep 26, 2011 4:57 am

Any plans for adding the operations with square roots and other mathematical operations (sinus, cosinus and so on)?

What is a Mobile Phone Signal Booster
caractéristiques de votre Amplificateur GSM ou 3G.

TCWORLD · Post by **TCWORLD** » Tue Sep 27, 2011 4:19 am

Not unless you know of a way of doing that in Logic alone. I might have a look into it at some point though.

www.logiccircuit.org

8 X 8 Binary Multiplier

8 X 8 Binary Multiplier

Re: 8 X 8 Binary Multiplier

Re: 8 X 8 Binary Multiplier

Re: 8 X 8 Binary Multiplier

Re: 8 X 8 Binary Multiplier

Re: 8 X 8 Binary Multiplier

Re: 8 X 8 Binary Multiplier

Re: 8 X 8 Binary Multiplier

Re: 8 X 8 Binary Multiplier

Re: 8 X 8 Binary Multiplier