Hello, I just downloaded this program and I'm having a hard time simulating my circuits. It seems I can't click any buttons and no LEDs light up even when power on mode is selected. I used logisim for a long time but decided to find a new program due to logisim's strange method of having the clock get progressively slower with parallel independent circuits.
Best regards, oddball.
Help with simulation.
Re: Help with simulation.
Hello,
Thanks for using the program.
Usually when you have correct circuit and when buttons connected to LEDs you should be able click the button and see LED reacting. You can try to read manual. Please start with: http://www.logiccircuit.org/edit.html if you still having any problems please upload your project file in this conversation and I’ll try to see if anything is wrong.
You can read all the help topics at: http://www.logiccircuit.org/help.html
Hope you’ll sort it out.
Thanks for using the program.
Usually when you have correct circuit and when buttons connected to LEDs you should be able click the button and see LED reacting. You can try to read manual. Please start with: http://www.logiccircuit.org/edit.html if you still having any problems please upload your project file in this conversation and I’ll try to see if anything is wrong.
You can read all the help topics at: http://www.logiccircuit.org/help.html
Hope you’ll sort it out.